Mipa WBC thinner

Mipa WBC thinner is the dedicated thinner for adjusting Mipa WBC waterborne basecoat application viscosity within the correct WBC mixing and spraying process.

Price range: €5,20 through €21,94

Mipa WBC thinner

Mipa WBC thinner is made for the Mipa WBC waterborne basecoat system. It adjusts the sprayed material to the correct working viscosity after the basecoat colour has been prepared within the Mipa formula and system process. Correct thinning helps the waterborne basecoat lay down evenly, support colour accuracy and create a surface ready for clearcoat after the prescribed flash-off time.

Mipa WBC basecoat data refers to thinning the prepared WBC material with Mipa WBC thinner or Mipa WBS accelerator, depending on the process requirements. The thinner is therefore part of the WBC coating system rather than a general-purpose solvent thinner. It should be used only in the amount required for the selected colour and application conditions.

Mipa WBC thinner is important because waterborne basecoat performance depends on controlled viscosity and drying behaviour. Too little or too much adjustment can affect spray pattern, film formation, colour shade and effect orientation. The 1 l and 5 l sizes cover small repair preparation as well as regular WBC colour mixing. Mipa WBC thinner belongs next to the WBC mixing components, binder and clearcoat products whenever the Mipa WBC system is used correctly.

The thinner should be stored closed and kept clean so waterborne basecoat material is not contaminated during mixing. Accurate measuring also matters: WBC colours depend on formulation discipline, and the thinner is part of that controlled process rather than a casual adjustment added by feel.

How is it used?

Add Mipa WBC thinner only as required by the WBC basecoat formula. Stir the material thoroughly, apply the basecoat under suitable conditions and allow the correct flash-off before applying the selected Mipa clearcoat.

Technical information

Product type Dedicated thinner for Mipa WBC waterborne basecoat
System Mipa WBC
Use Adjustment of spray viscosity
Application role Supports even basecoat application and correct process timing
Available sizes 1 l, 5 l

Article numbers

Option Article number EAN / GTIN
1 l 283110000 4016176155952
5 l 283150000 4016176156935

© 2026 All Rights Reserved.

0