Mipa EP 950-25 2K EP Hardener Normal is the matching 2K epoxy hardener for compatible Mipa epoxy primers and topcoats. It is the curing component that gives the selected epoxy base the firm, dense character an epoxy system is known for after application.
Measured to the correct base product ratio, the hardener supports reliable curing, adhesion and film strength. That matters on metal parts, prepared structures and protective coating work where the finished layer has to remain hard wearing rather than stay soft or undercured.
Mipa EP 950-25 net 2K-EP hardener normal is used with the specified Mipa epoxy primer or topcoat and is not intended as a stand-alone coating. This hardener supports the intended curing speed, film hardness and final coating performance when used with compatible Mipa materials.
For regular epoxy coating work, this hardener keeps approved Mipa EP systems complete. Once combined with the correct base material, it supports a cured finish with the robust feel and dependable performance expected from a proper 2K epoxy coating.
| Product type | 2K epoxy hardener |
|---|---|
| Use | Hardener for Mipa 2K epoxy primers and topcoats |
| Binder base | Polyaminoamide |
| Application temperature | Around 20 to 30 °C |
| Mixing ratio | Follows the specified Mipa base product |
| Thinner | Follows the specified Mipa base product |
| Available sizes | 1 kg, 5 kg |
| Option | Article number | EAN / GTIN |
|---|---|---|
| 1 kg | 116810000 | 4016176096781 |
| 5 kg | 116860000 | 4016176224764 |
Correct use helps the next step in the job stay cleaner, more predictable and easier to control.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
