Mipa WEP 9500-25 WBS 2K EP Hardener is the matching waterborne 2K epoxy hardener for compatible Mipa WBS epoxy primers and topcoats. It is the second component that allows the selected waterborne epoxy base to cure into a durable protective coating.
When it is mixed to the specified ratio of the chosen Mipa WBS product, the hardener supports adhesion, film strength and the firm cured surface expected from a two component epoxy system. That keeps the coating functional on prepared metal and other approved substrates while staying within the waterborne system.
Mipa WEP 9500-25 WBS 2K-EP hardener is kept frost free and is used only with the matching Mipa WBS epoxy base. Its job is not to change colour or appearance on its own, but to make sure the primer or topcoat reaches the curing behaviour and protective performance Mipa WEP 9500-25 WBS 2K-EP hardener was selected for.
For refinishers using Mipa waterborne epoxy products, this hardener completes the mix and keeps the coating system ready for proper application. Once combined with the correct base material, it supports a dependable cured result with the surface strength expected from a 2K WBS epoxy build.
| Product type | Waterborne 2K epoxy hardener |
|---|---|
| Use | Hardener for Mipa WBS epoxy primers and topcoats |
| System | Waterborne epoxy |
| Storage | Store frost free |
| Mixing ratio | Follows the specified Mipa WBS base product |
| Thinner | Follows the specified Mipa WBS base product |
| Available sizes | 1 kg, 5 kg |
| Option | Article number | EAN / GTIN |
|---|---|---|
| 1 kg | 116910000 | 4016176213362 |
| 5 kg | 116950000 | 4016176261639 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
