Mipa Paint Remover Blue Transparent 750 ml creates a temporary protective film on bare sheet metal when fresh metal has to stay protected between repair steps, storage or transport. The coating dries to a blue transparent layer that keeps the metal surface covered until the next stage can begin.
The peelable film helps keep moisture and incidental contamination away from exposed metal during short to medium holding periods. That makes it useful after stripping, panel preparation or metal finishing when the final primer or coating is not applied on the same day.
Because the layer can be removed again, the metal does not have to stay committed to a permanent coating while the job is still moving through preparation. The transparent blue colour also keeps the protected area visible, so it is easy to see where coverage has already been applied.
This is a practical protection product for bare metal surfaces that need a clean pause between process steps. It adds temporary protection without turning the surface into a finished coating layer and keeps the metal ready for the next treatment stage.
The removable film keeps the protection stage separate from the final coating stage, which helps maintain flexibility while the metal is still moving through preparation.
| Product type | Peelable temporary corrosion protection |
|---|---|
| Colour | Blue transparent |
| Volume | 750 ml |
| Use | Bare sheet metal protection between process steps |
| Thinner | Mipa 2K-Thinner |
| Article number | 246910000 |
|---|---|
| EAN / GTIN | 4016176012040 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
