Mipa 1K Adhesion Cleaner is a surface cleaner with an adhesion-promoting effect on existing painted finishes. It is used when a surface needs to be cleaned and prepared for recoating without automatically going through a full sanding step first. That makes it valuable on larger painted parts where preparation time matters.
Mipa 1K Adhesion Cleaner 5 l works by cleaning the old finish while also preparing it for the next coat. It is applied generously and evenly in a criss-cross pattern until the surface changes into a clearly visible matt appearance. That visible change signals that the coating surface is ready for the following paint step.
This makes it particularly useful on construction vehicles, commercial vehicles and other large coated surfaces that are being repainted economically. Instead of treating it as a universal degreaser, it is used as a preparation product within a repaint process where the existing coating stays in place and receives a new finish.
The 5 litre pack is well suited to repeat preparation work and larger surface areas. It keeps the process simple: clean, prepare the existing finish properly and move on to recoating with the specified solvent-based Mipa 2K topcoats inside the recommended time window. It keeps the system controlled from mixing or preparation through to the next coating step.
| Product type | Adhesion-promoting cleaner |
|---|---|
| Use | Cleaning and surface preparation before recoating |
| Target surface | Existing painted finishes |
| Recoatable with | Solvent-based Mipa 2K topcoats |
| Recoating window | Approx. 15 minutes to 2 hours at 20 °C |
| Content | 5 l |
| Article number | 124250000 |
|---|---|
| EAN / GTIN | 4016176653878 |
© 2026 All Rights Reserved.
Start with the item. The job page shows what to use and in which order.
