Pro Mix Industry BC 200-30 Two Coat Basecoat Industry Basic Pack 5 kg is a solvent based basecoat base pack for industrial two layer coating systems. It is used to create BC 200-30 colours that receive a compatible clearcoat after the basecoat has flashed off correctly.
Two layer industrial coatings are useful when colour effect, appearance and clearcoat protection are required together. The basecoat provides the colour layer, while the clearcoat supplies the final gloss level, protection and surface durability. BC 200-30 is therefore part of a system rather than a standalone topcoat.
The base pack belongs in the Mipa Pro Mix Industry mixing process. Colour accuracy, opacity and final appearance depend on the correct formula, mixing components, spray viscosity, application technique and clearcoat choice. Proper substrate preparation and compatible primer layers remain essential before the basecoat is applied.
Mix BC 200-30 to the formula, then apply even coats to the prepared substrate. Allow the required flash off before clearcoat application. Do not leave the basecoat as the final exposed surface unless the system instructions specifically allow it.
Apply BC 200-30 as the colour layer within the specified two layer system. Follow the mixing formula, spray settings and flash off time, then finish with the compatible clearcoat.
| Item type | Industrial two coat basecoat base pack |
|---|---|
| System | Pro Mix Industry BC 200-30 |
| Finish structure | Basecoat followed by clearcoat |
| Content | 5 kg |
| Article number | 178950000 |
|---|---|
| EAN / GTIN | 4016176378849 |
BC 200-30 is intended for a two layer system and normally needs compatible clearcoat.
No. It is a base pack for mixed industrial basecoat colours.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
