MP Application Gun for MP 2K PU Adhesive is the manual applicator made for dispensing compatible MP 2K PU adhesive cartridges. It gives controlled pressure to the cartridge so the two component adhesive can move through the mixing nozzle in a steady bead during plastic repair, bonding and reinforcement tasks.
Correct dispensing is important with two component adhesive. Uneven pressure can waste material or make bead placement less precise. A matching application gun helps keep the cartridge stable, supports the correct flow through the mixer nozzle and gives better hand control around cracks, tabs, seams and repair backing areas.
The gun belongs with the MP 2K PU adhesive system and the correct static mixing nozzles. It is useful for plastic bumper repairs, broken mounting tabs, trim repair, reinforcement fabric work and bonded plastic sections where adhesive must be applied accurately before the material starts curing.
Load the cartridge correctly and attach a fresh compatible mixing nozzle before use. Press the trigger steadily until both components flow through the nozzle and discard the initial uneven material if required by the adhesive instructions. Apply the bead, join or reinforce the part, then allow the adhesive to cure fully before sanding or coating.
Insert the compatible adhesive cartridge, attach the correct mixing nozzle and dispense with steady pressure. Follow the adhesive curing time before shaping, sanding or applying the next repair material.
| Item type | Manual application gun |
|---|---|
| System use | MP 2K PU adhesive cartridges |
| Main use | Plastic repair adhesive dispensing |
| Requires | Compatible mixing nozzles |
| Article number | 266810050 |
|---|---|
| EAN / GTIN | 4016176419016 |
No. Two component adhesive needs the correct static mixer nozzle for proper mixing.
No. This item is the application gun for compatible cartridges.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
