MP Glass primer 30 ml is a transparent primer for prepared glass surfaces. It is used when the selected coating or bonding process requires a glass adhesion promoter before the next material is applied. The small bottle is practical for local glass preparation, edge areas and smaller jobs where only a controlled amount of primer is needed.
Glass is a difficult surface because smooth mineral substrates give coatings and bonding materials little mechanical grip. A dedicated primer improves the prepared surface so the following compatible system can bond more reliably. MP Glass primer helps create that prepared interface when the process specifically calls for glass primer.
The clear format is useful where the primer should not add visible colour to the glass area. It can be used around prepared edges, contact zones and coated glass details before the next material is applied. Clean preparation remains essential because grease, dust, silicone or old residue can prevent reliable adhesion.
Apply only to suitable cleaned and prepared glass. Use the amount needed for the contact area and follow the drying time stated by the coating or bonding system. Close the bottle carefully after use and keep the application tool clean so contamination does not enter the primer.
Clean and prepare the glass for the complete system. Apply a thin controlled layer only where primer is needed, allow the stated flash off or drying time and continue with the compatible coating or bonding step.
| Item type | Glass primer |
|---|---|
| Colour | Transparent |
| Content | 30 ml |
| Main use | Adhesion preparation on glass |
| Article number | 266920000 |
|---|---|
| EAN / GTIN | 4016176684469 |
No. Glass needs thorough cleaning and preparation before primer is applied.
No. It prepares glass for a compatible following system.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
