MP Tailgate Holder Set TrunkFix is a telescopic support set for holding tailgates, bonnets, boots and similar moving vehicle parts in a stable working position. It helps keep heavy or spring loaded panels open and controlled when access is needed around edges, hinges, inner sections and adjoining body areas.
A stable support makes preparation cleaner and safer. Loose panels can move while sanding, masking, degreasing, spraying or fitting parts. TrunkFix helps reduce unwanted movement, giving better control when the open angle of a tailgate or bonnet matters for access and coating reach.
The telescopic design allows the support length to be adjusted to the job. That makes it practical for different body shapes and repair positions. It is useful during refinishing, dent repair, corrosion treatment, masking, polishing and inspection work where the panel must remain open without relying only on weak gas struts or improvised supports.
Fit the supports only on stable contact points and check that the panel cannot slip before work begins. Do not overload the holder or place it against fragile trim. Recheck stability after moving the panel, changing position or adding force through sanding or polishing.
Set the telescopic holder to the required length, place it on stable contact points and check the panel position before work starts. Recheck the support after any movement or heavy pressure on the panel.
| Item type | Tailgate holder set |
|---|---|
| Design | Telescopic |
| Main use | Supporting open vehicle panels |
| Suitable parts | Tailgates, bonnets, boots and similar lids |
| Article number | 55101401016 |
|---|---|
| EAN / GTIN | 4016176163315 |
No. It is a temporary support during work and not a vehicle repair part.
Adjustable length helps position different panel shapes at a useful working angle.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
