MP Cartridge Press Professional closed design is a manual dispensing tool for sealants, adhesives and cartridge based materials. The closed body supports 310 ml cartridges and foil tubes up to 400 ml, giving a more stable holder than a light open frame when thicker materials need steady pressure.
Controlled dispensing matters when adhesive, seam sealer or flexible material needs to be applied in a clean bead. A solid cartridge press helps reduce uneven squeezing and gives better control around seams, joints, bonded areas and narrow application lines. It also helps keep the cartridge aligned while pressure is applied by hand.
The closed design is useful for repeated use with compatible cartridge materials. It suits body repair, bonding, sealing, panel preparation, detail sealing and general material application where a clean bead is easier to work than material applied from a loose tube or improvised tool.
Cut the cartridge nozzle to the required bead size, puncture the seal if needed and place the cartridge or foil tube securely in the press. Apply pressure smoothly and release tension when stopping so excess material does not continue flowing from the nozzle.
Load the compatible cartridge or foil tube, prepare the nozzle and press the trigger steadily. Release pressure at the end of the bead to reduce unwanted material flow.
| Item type | Manual cartridge press |
|---|---|
| Design | Closed |
| Cartridge compatibility | 310 ml cartridges |
| Foil tube compatibility | Up to 400 ml |
| Article number | 562060000 |
|---|---|
| EAN / GTIN | 4016176263886 |
The closed body gives better support to the cartridge or foil tube during manual dispensing.
Check size and material compatibility before use. The listed format is 310 ml cartridges and foil tubes up to 400 ml.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
