MP anti-drumming plate FS 5 50 x 50 cm helps reduce panel vibration, resonance and drumming noise. The self-adhesive insulating plate bonds to suitable surfaces and adds damping where thin metal or plastic sections can vibrate during driving, handling or operation. The textured, highly flexible material adapts to shaped areas more easily than a rigid insulation sheet.
The 50 x 50 cm format gives enough coverage for larger local damping areas while still being easy to trim to shape. MP anti-drumming plate FS 5 is useful in doors, panels, cavities, body sections, equipment housings and other locations where vibration control improves comfort or perceived build quality. Clean surface preparation is important so the adhesive can grip securely.
The flexible plate is especially useful after repair or restoration work where old damping material has been removed or where a panel sounds too hollow. Added damping can reduce vibration transfer and help create a more solid feel. The self-adhesive backing keeps installation simple when the surface is dry, dust free and free from grease or loose coating residue.
Cut the plate to size before final positioning. Press it down evenly over the full contact area and avoid trapping dirt or air pockets under the sheet. On visible or heat exposed areas, check suitability before installation. MP anti-drumming plate FS 5 is a practical material for local acoustic and vibration improvement where a flexible, adhesive damping sheet is preferred.
Use MP anti-drumming plate FS 5 to damp vibrating panels and reduce drumming noise. The flexible adhesive sheet can be trimmed and bonded to prepared surfaces where local vibration control is needed.
| Product type | Self-adhesive insulating panel |
|---|---|
| Size | 50 x 50 cm |
| Material character | Highly flexible and textured |
| Main use | Protection against vibration and noise |
| Application area | Suitable prepared metal or plastic parts |
| Article number | 562200001 |
|---|---|
| EAN / GTIN | 4016176319002 |
Does MP anti-drumming plate FS 5 need adhesive?
The plate is self-adhesive, so no separate adhesive is normally needed on suitable prepared surfaces.
Can it be cut to shape?
Yes. The 50 x 50 cm sheet can be trimmed to match the area being damped.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
