MP Suction Hose 3.5 m Universal is a flexible extraction hose for dust removal setups around sanding, surface preparation and clean up work. The 3.5 metre length gives useful reach between the extraction unit and the working area, while the universal format suits setups where a practical hose connection is needed for compatible MP extraction equipment.
A stable suction hose is important when sanding dust needs to be removed close to the source. Cleaner extraction helps keep the working surface easier to see, reduces loose dust around freshly prepared parts and supports a more controlled preparation area before coating, polishing or assembly continues.
The hose is especially useful with vacuum based sanding layouts, hand blocks with extraction, dust removal accessories and general MP dust extraction equipment. The flexible body allows movement around panels and benches without keeping the extraction unit directly next to the repair zone.
Check the connection size before use and make sure the hose sits securely on the vacuum or adapter. Keep sharp bends out of the hose where possible, empty the extraction unit when required and replace blocked bags or filters so airflow remains strong during sanding and cleaning tasks.
Connect the hose securely to the extraction unit and the compatible tool, block or adapter. Keep the route as open as possible, check airflow before sanding and clean or replace collection parts when suction drops.
| Item type | Universal suction hose |
|---|---|
| Length | 3.5 m |
| Main use | Dust extraction connection |
| Compatibility | Check connection fit with the extraction unit or adapter before use |
| Article number | 572000210 |
|---|---|
| EAN / GTIN | 4016176620542 |
No. It needs a compatible extraction unit or vacuum source.
Kinks, loose fittings and blocked collection parts reduce airflow and make dust extraction less effective.
© 2026 All Rights Reserved.
Start with the item. The job page shows what to use and in which order.
