MP Lint Needle Set is a fine correction tool for removing tiny particles from wet paint before they become a cured defect. The set contains one holder and ten needles with micro-fine barbs. These small barbs help lift dust, fluff and dirt from the wet coating surface with minimal disturbance to the surrounding paint film.
The tool is useful when a small inclusion appears during fresh coating application and immediate, careful correction is possible. A fingertip, cloth or normal tool can spread the mark, create a larger disturbance or drag paint away from the surface. The lint needle reaches the particle directly, so the defect can often be removed while surface tension helps the wet coating close again.
MP Lint Needle Set is especially helpful for clearcoat, topcoat and wet lacquer surfaces where a tiny speck would otherwise need later sanding and polishing. It supports clean finishing by reducing the chance that a small piece of fluff or airborne dust cures into the surface. The holder gives better handling than a loose needle and keeps the tip easier to position under good lighting.
Use the needles only with careful, controlled movement. The goal is to touch the inclusion, not scratch or stir the surrounding film. Keep replacement needles clean and protected so old paint residue or dust does not create new marks. For cured defects, use the correct sanding, polishing or paint-run removal method instead.
Use MP Lint Needle Set to remove very small inclusions from wet paint surfaces. The fine barbed needle can lift the particle directly before the defect cures into the coating.
| Product type | Lint needle set |
|---|---|
| Set contents | 1 holder and 10 needles |
| Needle design | Micro-fine barb |
| Main use | Removing dust, dirt and fluff from wet paint |
| Related item | Replacement needles 581017134 |
| Article number | 581017034 |
|---|---|
| EAN / GTIN | 4016176260984 |
Does MP Lint Needle Set work on cured paint defects?
It is intended for wet paint inclusions. Cured defects normally need sanding, polishing or another finishing method.
What is included in the set?
The set contains one holder and ten lint needles.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
