MP SprayGun UBS/HV applies underbody protection and cavity sealing materials from compatible 1l round-thread cans. The gun is made for sprayable protective materials used on sills, underbody sections, cavities and similar areas where corrosion protection, stone chip resistance or cavity sealing may be required. A dedicated gun gives better control than improvised application methods and helps reach areas that need a defined spray pattern.
MP SprayGun UBS/HV has an 8 mm wide needle and a 60 cm spray tube. That combination supports direct application and deeper access into cavity areas. The tool is designed for all sprayable materials in 1l cans with round thread, making it suitable for compatible underbody protection and body cavity materials supplied in that format.
Controlled air pressure and correct material flow are important for protective coatings. MP lists an operating pressure of 1.6 bar, air consumption of 250 Nl/min and approximate weight of 550 g. These values help the user match the gun to a suitable air supply and handle the tool with predictable balance during application.
Use MP SprayGun UBS/HV only with compatible sprayable protective materials and observe the coating material instructions for preparation, pressure, distance and film build. Clean the gun after use before material cures inside the tube or nozzle. Proper cleaning keeps the spray pattern usable and prevents blocked passages during the next application.
Use MP SprayGun UBS/HV for applying compatible underbody protection and cavity sealing materials from 1l round-thread cans. The included spray tube helps reach cavity areas and deeper sections.
| Product type | Underbody and cavity protection spray gun |
|---|---|
| Can compatibility | Sprayable materials in 1l cans with round thread |
| Included parts | 8 mm wide needle and 60 cm spray tube |
| Air consumption | 250 Nl/min, 2.1 cfm |
| Pressure | 1.6 bar, 12/60 psi |
| Weight | Approx. 550 g, 19 oz |
| Article number | 583020000 |
|---|---|
| EAN / GTIN | 4016176232691 |
Which cans fit MP SprayGun UBS/HV?
MP lists compatibility with sprayable materials in 1l cans with round thread.
Does the gun include a spray tube?
Yes. The gun includes an 8 mm wide needle and a 60 cm spray tube.
© 2026 All Rights Reserved.
Start with the item. The job page shows what to use and in which order.
