MP Dry Blowing Stand Set DryStand brings two MP DryTech dry blow guns together with an adjustable stand for directed drying support. The setup is made to move a strong, controlled air flow across coated surfaces without holding each gun by hand through the full drying period.
The MP DryTech gun is a drying gun for reducing drying times, especially with water based paints. The technical data lists air consumption of about 350 l/min at 4.5 bar, air volume of about 600 l/min and a 14 times higher air flow rate compared with common dry guns. Those figures show why the DryStand set is useful when evaporation speed matters.
The stand allows the drying guns to be positioned up to 240 cm in height, so air can be directed onto panels, small parts, repairs and coated sections at a steady angle. Adjustable positioning also keeps the operator free to prepare the next step while the airflow continues across the surface.
MP DryStand is valuable for water based basecoat drying, local repairs and repeated coating tasks where airflow stability saves time. Correct air pressure, distance and coating instructions still matter. The airflow should support drying, not disturb wet film build or blow contamination across the surface.
Use MP DryStand with the included MP DryTech dry blow guns for directed air drying support on water based paint and compatible coating work.
| Type | Dry blowing stand set |
|---|---|
| Included tools | 2 MP DryTech dry blow guns |
| DryTech airflow | Approx. 600 l/min |
| DryTech air consumption | Approx. 350 l/min at 4.5 bar |
| Stand height | Adjustable up to 240 cm |
| Article number | 583040010 |
|---|---|
| EAN / GTIN | 4016176253771 |
Yes. The DryStand set includes two MP DryTech dry blow guns.
The stand keeps the drying guns positioned so airflow can continue across the surface without constant hand holding.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
