MP 2K PU Adhesive 50 ml 0.5 Minute with 2 Mixing Nozzles is a two component 50 ml polyurethane adhesive supplied with 2 mixing nozzles. It gives fast bonding and repair in a compact cartridge format that is easy to prepare and apply.
€10,37
MP 2K PU Adhesive 50 ml 0.5 Minute with 2 Mixing Nozzles is a compact 2K PU adhesive for quick repair work where clean dispensing, reliable mixing and controlled curing matter. The 50 ml cartridge is supplied with 2 mixing nozzles, so the adhesive can be prepared and applied straight away without adding separate accessories. The very short curing window suits repairs that need to lock in place almost immediately.
It is intended as a versatile PU repair adhesive for plastics and other common repair materials. That makes it useful when a part needs more than a surface tack and the repair has to hold shape, bridge a damaged area or support rebuilding of a broken section. In small repair zones, the cartridge size keeps the amount manageable and reduces waste compared with larger pack formats.
The adhesive cures in about 0.5 minute, which helps match the cartridge to the speed of the job. Faster versions suit quick spot repairs and repeated small fixes. Slower versions give more time for careful placement, especially when the repair edge, bonding face or rebuilt section needs to be aligned before the adhesive fully sets.
The included mixing nozzles support a clean two component mix during application. This keeps MP 2K-PU adhesive 0.5 min. 50 ml incl. 2 mixing nozzles practical for fast bonding of repair parts, joining plastic components and filling cracks or seams. It is a useful format for repair work where speed, control and a neat cartridge based application matter just as much as bond strength.
| Product type | 2K PU adhesive |
|---|---|
| Content | 50 ml |
| Curing time | 0.5 minute |
| Mixing nozzles included | 2 |
| Use | Repair bonding and filling |
| Article number | 266800005 |
|---|---|
| EAN / GTIN | 4016176475760 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
