Mipa Plastic Paint Spray gunmetal grey 400 ml is an elastic 400 ml finishing paint for plastic parts that need a clean gunmetal grey surface. Mipa Plastic Paint Spray is made for direct coating of prepared plastic and for recoating Mipa structure spray in the original colour tone. That makes it useful when plastic surfaces have been repaired, cleaned, keyed and brought back to a uniform finish.
The gunmetal grey tone suits darker plastic trim, covers, mirror areas and repaired parts that need a gunmetal grey finish. The elastic coating is valuable on plastic parts that can flex slightly in daily use. Instead of leaving repaired areas looking flat, faded or patchy, Mipa Plastic Paint Spray gives the part a more even colour and a fresh plastic coating appearance.
Application is straightforward for local repair and full small-part refinishing. Typical application uses two to three spray coats, a dry film build of 30 to 40 µm, a short flash-off between coats and ready for assembly after 12 hours. The aerosol format keeps the job accessible when only one part or a local area needs to be refinished.
Mipa Plastic Paint Spray gunmetal grey works best as part of careful surface preparation. Clean plastic, suitable sanding, correct masking and compatible primers or structure coatings where needed give the finish a stronger base. After spraying, the valve should be cleared so the aerosol stays usable for later touch-up work.
Use Mipa Plastic Paint Spray gunmetal grey 400 ml for prepared plastic parts, plastic trim repairs and recoating structured plastic surfaces that need an elastic gunmetal grey finish.
| Type | Elastic plastic finishing paint aerosol |
|---|---|
| Colour | gunmetal grey |
| Pack size | 400 ml |
| Spray coats | 2 to 3 applications |
| Dry film build | 30 to 40 µm |
| Ready for assembly | 12 h |
| Article number | 212850007S |
|---|---|
| EAN / GTIN | 4016176378627 |
Plastic Paint Spray is a finishing paint for direct coating of plastic parts. Preparation and compatibility still have to match the surface.
Yes. It is suitable for recoating Mipa structure spray in the original colour tone.
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
