MP Nozzle Set for MP SprayGun Profi S is a matched nozzle set for the MP SprayGun Professional S paint gun. The set replaces the key parts that shape material flow and atomisation, keeping the gun matched to the coating viscosity and the intended spray task. A clean nozzle, needle and air-cap setup supports the spray gun with a more stable fan, a more predictable paint flow and a cleaner finish during refinishing and coating work.
The 1.3 mm size suits finer paint application where controlled atomisation and a tighter material flow are required. The 1.6 mm and 2.0 mm sizes give more flow for heavier coating materials and broader repair tasks. The 2.5 mm size is used for spray filler and other high-build materials where a larger opening is needed to move material cleanly through the gun. Each size keeps the MP Profi S gun aligned with a specific material selection instead of forcing one nozzle setup across every job.
A correct nozzle set also maintains the working feel of the spray gun. When old parts are worn, blocked or damaged, the fan pattern can become uneven and coating transfer can lose accuracy. MP Nozzle Set restores the mechanical parts that control the spray, which supports cleaner overlap, more consistent film build and better control across panels, parts and prepared surfaces. The set is especially suited to professional paint preparation where a gun must remain dependable across repeated use.
The MP SprayGun Profi S platform is used for conventional and waterborne coating systems. A nozzle set chosen for the material type supports the gun work with the correct spray selection, from fine refinishing coats to heavier filler work. MP Nozzle Set for MP SprayGun Profi S (Mipa) numbers below separate the available sizes clearly for stock, service and replacement work.
| Type | Nozzle set for MP SprayGun Profi S |
|---|---|
| Gun fit | MP SprayGun Professional S |
| Available sizes | 1.3 mm, 1.6 mm, 2.0 mm, 2.5 mm |
| Application selection | Paint, coating and spray filler work depending on selected size |
| 2.5 mm use | Spray filler application |
| Option | Article number | EAN / GTIN |
|---|---|---|
| 1.3 mm | 581110013 | 4016176260090 |
| 1.6 mm | 581110016 | 4016176260106 |
| 2.0 mm | 581110020 | 4016176260113 |
| 2.5 mm | 581110025 | 4016176260120 |
© 2026 All Rights Reserved.
Start with the job, the surface or the step you are working on.
