MP Masking Film 10 µ 50 m x 2 m Transparent (Mipa)

transparent 10 µ PE masking film on a 50 m roll with 2 m working width. MP Masking Film protects panels, parts and surrounding areas against overspray, dirt and liquid contact during preparation and coating work.

Price range: €11,64 through €13,17

MP Masking Film 10 µ 50 m x 2 m Transparent (Mipa)

MP Masking Film 10 µ 50 m x 2 m transparent is a lightweight PE masking film for protecting vehicles, parts and surrounding work areas during preparation and coating. The transparent film covers large zones quickly, keeps overspray away from surfaces that must stay clean and gives the work area a tidy protective layer before spray application begins.

The 50 m roll length and 2 m width make the film suited to covering larger panel areas, vehicle sides, loose parts and paintshop zones. The film is folded on the roll for compact handling before it is opened out to full width. Two folded formats are available: 0.5 m folded width and 1 m folded width. Both formats open to a 2 m working width, so the correct choice mainly depends on storage, handling and the way the roll is used during masking.

The 10 µ HDPE film is transparent, tear resistant and liquid tight. It unfolds more easily than many conventional films, so masking work moves quickly when a surface must be covered before sanding residue, primer, filler, topcoat or clearcoat material can contaminate nearby areas. The PE material is recyclable and suited to routine use in professional preparation environments.

MP Masking Film supports clean paintshop workflow by reducing the risk of overspray, dust and accidental splash reaching finished or prepared surfaces. The film works alongside masking tape, masking paper and edge tapes where a complete protective setup is required. MP Masking Film 10 µ 50 m x 2 m Transparent (Mipa) numbers below separate the folded widths while keeping the same roll length, total width and film thickness.

What is it used for?

  • Covering vehicle panels, parts and surrounding work zones
  • Protecting surfaces against overspray, dust and liquid contact
  • Creating large masking coverage before preparation or spray work
  • Combining with masking tape or edge tape for complete protection

Technical data

Type transparent PE masking film
Material HDPE, recyclable PE
Roll length 50 m
Working width 2 m
Film thickness 10 µ
Properties Tear resistant, liquid tight, easy to unfold
Folded formats 0.5 m and 1 m

Article numbers

Option Article number EAN / GTIN
folded to 0.5 m 516750000 4002461190104
folded to 1 m 516760000 4002461171011

© 2026 All Rights Reserved.

0