Description
Mipa 1K-Fast-Filler is an acidic 1-component repair filler with excellent filling power for the automotive industry. It can be applied on sanded old 2K-paintworks, shop primers and directly on steel, aluminium and zinced substrates.
About this product
This product offers time savings thanks to fast drying and sandability. Do not apply on old thermoplastic coatings.
What is this product used for?
Use this filler for repairing uneven areas, shaping contours and preparing the substrate before primer and topcoat. It is intended for repair work where flexibility, adhesion and sanding properties matter.
How to use
Mix the filler with the supplied hardener until the colour is uniform. Apply in thin layers on a clean, sanded substrate, allow it to cure and then sand to the required contour.
Key features
- Filler
- Finish / colour: grey
- Size / content: 1 l, 3 l
- Suitable for: zinced substrates, steel, and aluminium
- Fast drying
Technical information
| Product type | Filler |
| Size / content | 1 l, 3 l |
| Finish / colour | grey |
| Suitable for | zinced substrates, steel, and aluminium |
| Thinner | Mipa 2K-Thinner Normal V 25, Mipa UN 21, Mipa Thinner UN |
| Drying / flash-off | 5 – 8 min between the coats 10 – 15 min prior to oven drying |
| Often used together with |
|
For the compatible thinner options for this product, see the linked products in the technical information table.
