Description
Mipa 4+1 Acrylfiller HS has very good filling properties and is very easy to sand. This filler can be used as compact as well as high-build filler.
About this product
The combination with Mipa 2K-Reaktivzusatz VR allows a very quick processing followed by heat-drying or drying at room temperature. This offers saving potentials in terms of spray booth occupancy, stoving times as well as working time.
What is this product used for?
Use this filler for repairing uneven areas, shaping contours and preparing the substrate before primer and topcoat. It is intended for repair work where flexibility, adhesion and sanding properties matter.
Use and processing
Mix the filler with the supplied hardener in the stated ratio (4:1 by weight; 6:1 by volume). Apply in thin layers on a clean, sanded substrate, allow it to cure and then sand to the required contour. From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation
Features
- Filler
- Finish / colour: white
- Size / content: 1 l, 3 l, 4 l
- High-build formulation
- Easy sanding
Technical data
| Product type | Filler |
| Size / content | 1 l, 3 l, 4 l |
| Finish / colour | white |
| Mixing ratio | 4:1 by weight; 6:1 by volume |
| Hardener | H 5, H 10 |
| Thinner | Mipa 2K-Thinner |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation |
| Storage | At least 3 years in unopened original containers |
| VOC | EU limit value for this product (category B / c): 540 g / l. This product contains max. 500 g / l of VOC |
| Often used together with |
|
For the compatible thinner options for this product, see the linked products in the technical information table.
