Description
Mipa 2K-HS-Klarlack CC 8 is a VOC-compliant High-Solid acrylic clearcoat for complete or partial paintwork of cars and commercial vehicles and provides an especially brilliant finish and optimal flow on solvent-based or water-based basecoats.
Product information
Mipa 2K-HS-Klarlack CC 8 guarantees an optimal curing especially in case of oven drying but also at room temperature. It can be polished immediately after forced drying and is highly resistant to all kind of weathering as well as to mechanical stress and chemical agents.
Typical applications
Use this clearcoat as the final transparent layer over compatible colour coats when a clear look is required. The listed application areas include commercial vehicles and cars.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (2:1); adjust with Mipa 2K-Verdünnung kurz V 10 Mipa 2K-Verdünnung normal V 25 Mipa 2K-Verdünnung lang V 40 if required. Apply even coats and respect the flash-off, drying and recoating times of the full system.
Features
- 2K clearcoat
- Finish / colour: clear
- Size / content: 0,5 l, 1 l, 5 l
- Suitable for: commercial vehicles and cars
- Mixing ratio: 2:1
Technical details
| Product type | 2K clearcoat |
| Size / content | 0,5 l, 1 l, 5 l |
| Finish / colour | clear |
| Suitable for | commercial vehicles and cars |
| Mixing ratio | 2:1 |
| Thinner | Mipa 2K-Thinner Normal V 25, Mipa 2K-Thinner Short V 10, Mipa 2K-Thinner Long V 40 |
| Drying / flash-off | 1 – 3 min between the coats 10 – 15 min before oven drying |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
