Description
Mipa 2K Clear Coat Matt CM is a Two-component, acrylic-based clearcoat with a clear, matt appearance. It is designed as the final protective layer over compatible colour coats where appearance, durability and surface protection matter.
About this product
Two-component, acrylic-based clearcoat a gloss level of 15-20 gloss units at a 60°-angle. Medium-Solid quality, good resistances, uniformly matted surfaces.
Typical applications
Use this clearcoat as the final transparent layer over compatible colour coats when a clear, matt look is required. The listed application areas include plastic parts.
How to use
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (3:1; 2:1); adjust with Mipa 2K-Verdünnung normal V 25 Mipa 2K-Verdünnung lang V 40 if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation
Highlights
- Two-component, acrylic-based clearcoat
- Finish / colour: clear, matt
- Size / content: 0,5 l, 5 l
- Suitable for: plastic parts
- Gloss finish
Technical information
| Product type | Two-component, acrylic-based clearcoat |
| Size / content | 0,5 l, 5 l |
| Finish / colour | clear, matt |
| Suitable for | plastic parts |
| Mixing ratio | 3:1; 2:1 |
| Thinner | Mipa 2K-Thinner Normal V 25, Mipa 2K-Thinner Long V 40 |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation |
| Storage | at least 3 years in unopened original container |
| VOC | EU limit value for this product (category B / e): 840 g / l This product contains max. 563 g / l of VOC |
| Often used together with |
|
For the compatible thinner options for this product, see the linked products in the technical information table.
