Description
Mipa P 20 is a laminating resin that cures quickly with benzoyl peroxide hardener. In combination with glass fabric, glass mat or unwoven fibre glass it is a high performance system to repair easily and quickly larger holes in GRP parts and car body sheets.
Product information
Mipa P 20 is also available as set (Mipa P 20 Reparatur-Set) which contains the glass fabric, brush and mixing cup.
Typical applications
Use this hardener when a compatible Mipa 2K-PU glass coating has to bond correctly on glass. It is intended for systems that work with Mipa 1K-Glasprimer and is best kept for the exact products listed by the manufacturer.
How to use
Add the hardener only to the specified glass coating system. Use Mipa 1K-Glasprimer as adhesion promoter and make sure the recoatable side of the glass has been identified before coating. Close the container immediately after use, because the hardener reacts with moisture.
Features
- Glass hardener
- Size / content: 250 g, 1 kg
- Pot life: 10 – 15 min at 20 °C (if adding 2 % of hardener)
Technical details
| Product type | Glass hardener |
| Size / content | 250 g, 1 kg |
| Suitable for | cars, GRP, and glass |
| Mixing ratio | 100:1 |
| Pot life | 10 – 15 min at 20 °C (if adding 2 % of hardener) |
