Description
High-quality 2K polyurethane acrylic primer with active protection against corrosion and excellent adhesion to steel, zinced substrates and aluminium.
Product details
Recoatable with 1K and 2K paints. This product can be used as adhesion promoter, primer and filler and can also be applied wet on wet.
Typical applications
This product is intended for professional coating work on zinced substrates, steel, and aluminium with a white finish.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (10:1 by weight; 7:1 by volume) with Mipa PU 900-25, PU 912-10, PU 912-25; adjust with Mipa 2K-Verdünnung V 10, V 25, V 40 if required. Apply even coats and respect the flash-off, drying and recoating times of the full system.
Highlights
- High-quality 2K polyurethane acrylic primer
- Finish / colour: white
- Size / content: 5 kg, 20 kg
- Suitable for: zinced substrates, steel, and aluminium
- Mixing ratio: 10:1 by weight; 7:1 by volume
Technical information
| Product type | High-quality 2K polyurethane acrylic primer |
| Size / content | 5 kg, 20 kg |
| Finish / colour | white |
| Suitable for | zinced substrates, steel, and aluminium |
| Mixing ratio | 10:1 by weight; 7:1 by volume |
| Hardener | Mipa PU 900-25, PU 912-10, PU 912-25 |
| Thinner | Mipa 2K-Thinner Short V 10, Mipa 2K-Thinner Normal V 25, Mipa 2K-Thinner Long V 40 |
| Pot life | with hardener -25 approx |
| Drying / flash-off | hardener object |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
