Description
Two-component zinc phosphate epoxy acrylic primer for coating steel, zinced substrates, aluminium, GRP and e- coatings.
Product details
Its outstanding filling power and resistance to solvents and chemical agents make this product particularly suitable for high-quality coating of highly stressed installations and devices. Furthermore, this primer can be overcoated with Mipa 2K topcoats after a drying of only 20 minutes at room temperature.
Typical applications
This product is intended for professional coating work on zinced substrates, steel, aluminium, and GRP with a grey finish.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (6:1 by weight; 4:1 by volume) with Mipa PU 914-10, PU 914-25; adjust with Mipa 2K-Verdünnung V 10, V 25, V 40 if required. Apply even coats and respect the flash-off, drying and recoating times of the full system.
Features
- Primer
- Finish / colour: grey
- Size / content: 6 kg, 15 kg
- Suitable for: zinced substrates, steel, aluminium, and GRP
- Mixing ratio: 6:1 by weight; 4:1 by volume
Technical data
| Product type | Primer |
| Size / content | 6 kg, 15 kg |
| Finish / colour | grey |
| Suitable for | zinced substrates, steel, aluminium, and GRP |
| Mixing ratio | 6:1 by weight; 4:1 by volume |
| Hardener | Mipa PU 914-10, PU 914-25 |
| Thinner | Mipa 2K-Thinner Short V 10, Mipa 2K-Thinner Normal V 25, Mipa 2K-Thinner Long V 40 |
| Pot life | with hardener-10 approx. 2,5 – 3 h at 20 °C Spray / processing viscosity: |
| Drying / flash-off | hardener object |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
