Description
Thixotropic, high-build single-layer black mica coating designed for brush, roller and spray applications according to the former TL 918 300, sheet 77. It is suitable to coat constructions (halls, pipes, doors, wall and ceiling panels, roofs, containers, vehicles) which are made of steel, zinced steel, aluminium and PVC.
Product information
For interior and exterior use. Also suitable to coat mineral substrates (concrete, screed, and so on).
Typical applications
This product is intended for professional coating work on vehicles, zinced steel, steel, and aluminium with a matt finish.
How to use
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Features
- Single-coat paint
- Finish / colour: matt
- Size / content: 1 kg, 5 kg, 20 kg
- Suitable for: vehicles, zinced steel, steel, and aluminium
- High-build formulation
Technical information
| Product type | Single-coat paint |
| Size / content | 1 kg, 5 kg, 20 kg |
| Finish / colour | matt |
| Suitable for | vehicles, zinced steel, steel, and aluminium |
| Pot life | Spray / processing viscosity: Ready for use, if necessary thin with ipa UN-Verdünnung or Verdünnung UN 21 |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 3 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| VOC | < 500 g / l |
