Description
Its special formulation provides adhesion to even the most challenging substrates without prior sanding.
Product details
Mipa 1K-Haftpromoter-Spray can be used on steel, aluminium (also polished or anodised), galvanised substrates, stainless steel (even polished), non-ferrous metals (also polished), chromed substrates, powder coatings and cathodic e-coatings. Time savings can be achieved since the product is fast drying, recoatable and does not need to be sanded.
Typical applications
Use this clearcoat as the final transparent layer over compatible colour coats when a colourless look is required. The listed application areas include galvanised substrates, steel, aluminium, and GRP.
Use and processing
Shake the can thoroughly before use and spray several even coats on a correctly prepared surface. Observe the flash-off time between coats and allow the film to dry fully before sanding, polishing or overcoating.
Key features
- Primer spray
- Finish / colour: colourless
- Size / content: 400 ml
- Pack information: 6 x 400 ml
- Fast drying
- UV resistance
Technical information
| Product type | Primer spray |
| Size / content | 400 ml |
| Finish / colour | colourless |
| Pack information | 6 x 400 ml |
| Suitable for | galvanised substrates, steel, aluminium, and GRP |
| Drying / flash-off | at 20 °C Dust dry after approx. 5 – 10 min Overcoatable after approx. 10 min Processing conditions From +10 °C and up to 80 % relative air humidity |
| GTIN | 4016176499155 |
| Often used together with |
|
Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
