Description
Mipa 1K-Isolator is a fast drying special primer, which protects efficiently solvent-sensitive old paintworks (e. g. thermoplastic coatings, coatings based on alkyd resins, and so on) from lifting or bleeding when overcoating with solvent-based coating systems.
About this product
Protects efficiently solvent-sensitive old paintworks from lifting or bleeding when overcoating with solventbased coating systems.
Where does this product work best?
This product is intended for professional coating work.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Adjust the product with ready for use where required by the system and application method. Apply even coats and respect the flash-off, drying and recoating times of the full system. from +10° C and up to 80 % relative air humidity. Ensure an adequate air ventilation
Key features
- Primer
- Size / content: 1 l
- Pack information: 6 x 1 l
- Fast drying
- GTIN: 4016176586077
Technical data
| Product type | Primer |
| Size / content | 1 l |
| Pack information | 6 x 1 l |
| Pot life | Spray / processing viscosity: |
| Processing conditions | from +10° C and up to 80 % relative air humidity. Ensure an adequate air ventilation |
| Storage | at least 2 years in unopened original container. VOC Regulation : EU limit value for this product (category B / e): 840 g / l This product contains max |
| GTIN | 4016176586077 |
| Often used together with |
|
Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
