Description
Fast drying 2K primer to paint cars and commercial vehicles and to prime steel parts, castings, container, machines, chassis, transport-racks, and so on.
Product information
2K-washprimer, primer and filler, chromate free, active corrosion protection on iron and steel, good adhesion on non ferrous metal. Good corrosion protection on iron and steel sheets.
What is this product used for?
This product is intended for professional coating work on commercial vehicles, cars, zinced substrates, and steel with a grey finish.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (2:1) with WPZ; adjust with Spray viscosity After the addition of hardener the ready-to-use viscosity is achieved if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. from +10 °C and up to 80 % relative air humidity. Ensure sufficient ventilation
Highlights
- Primer
- Finish / colour: grey
- Size / content: 5 l
- Suitable for: commercial vehicles, cars, zinced substrates, and steel
- Fast drying
Technical details
| Product type | Primer |
| Size / content | 5 l |
| Finish / colour | grey |
| Suitable for | commercial vehicles, cars, zinced substrates, and steel |
| Mixing ratio | 2:1 |
| Hardener | Mipa Hardener WPZ |
| Processing conditions | from +10 °C and up to 80 % relative air humidity. Ensure sufficient ventilation |
| GTIN | 4016176007237 |
