Description
Mipa 2K-Acryl-Grundierfiller is an easy-to-sand primer with high filling properties and excellent corrosion protection. It can be used as wet-on-wet filler, sanding filler or adhesion promoter with excellent adhesion on iron, steel, aluminium and zinced substrates.
About this product
Universal use of 2K-filler in a set including hardener. Adhesion on steel, zinc and alu.
Where does this product work best?
This product is intended for professional coating work on zinced substrates, steel, and aluminium with a grey finish.
How to use
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (10:1) with H 5 (included); adjust with Mipa 2K-Thinner if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. from +10 °C and up to 80 % relative air humidity. Ensure sufficient ventilation
Features
- Primer filler
- Finish / colour: grey
- Size / content: 1 kg
- Pack information: 6 x 1 kg
- Suitable for: zinced substrates, steel, and aluminium
- Corrosion protection
Technical data
| Product type | Primer filler |
| Size / content | 1 kg |
| Finish / colour | grey |
| Pack information | 6 x 1 kg |
| Suitable for | zinced substrates, steel, and aluminium |
| Mixing ratio | 10:1 |
| Hardener | H 5 |
| Thinner | Mipa 2K-Thinner |
| Pot life | 2 – 3 h at 20 °C Spray / processing viscosity: |
| Processing conditions | from +10 °C and up to 80 % relative air humidity. Ensure sufficient ventilation |
| GTIN | 4016176084221 |
| Often used together with |
|
For the compatible thinner options for this product, see the linked products in the technical information table.
