Description
Mipa Body Coat WBS is a water-dilutable and environmentally friendly stone chip protection paint with sound- absorbing properties. Suitable also as an insulating primer with smooth surface.
About this product
Spraying quality, stone chip protection, water thinnable Prepare the surface correctly, mix or thin the product where required and apply it according to the intended coating process.
What is this product used for?
This basecoat is intended for colour matching and refinishing work before clearcoating. It is used where accurate colour laydown and reliable overcoating with a compatible 2K clearcoat are required.
How to use
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Adjust the product with Ready for use where required by the system and application method. Apply even coats and respect the flash-off, drying and recoating times of the full system. From +10 °C and up to 80 % relative air humidity. Ensure an adequate supply and exhaust air ventilation
Key features
- Waterborne basecoat
- Finish / colour: black 9105
- Size / content: 1 l
- Pack information: 12 x 1 l
- GTIN: 4016176012200
Technical information
| Product type | Waterborne basecoat |
| Size / content | 1 l |
| Finish / colour | black 9105 |
| Pack information | 12 x 1 l |
| Pot life | Spray / processing viscosity: Thixotropic (undiluted) when applied by means of underbody spray gun or |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure an adequate supply and exhaust air ventilation |
| Storage | At least 2 years in unopened original container |
| VOC | EU limit value for this product (category B / e): 840 g / l. This product contains max. 50 g / l of VOC |
| GTIN | 4016176012200 |
