Description
Mipa E 65 S is a two-component spray filler based on epoxy resin to be applied on iron, zinc, aluminium, GRP, wood, plastics and mineral substrates. Mipa E 65 S is seawater proof and adheres also on slightly damp substrates.
Product details
This product is especially suitable to fill in one operation irregularities, deep sanding marks and rough pre-repair work.
What is this product used for?
This fast hardener is used when the matching Mipa 2K PU system needs that particular curing speed. It helps align the open time and through-cure of the coating with the job, temperature and chosen application method.
Use and processing
Add the hardener only to the matching Mipa product using the prescribed ratio (5:1). Process the mixture within the pot life and use the thinner, spray settings and drying schedule specified for the chosen base product. From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation
Features
- Brush or roller
- Finish / colour: grey
- Size / content: 1,5 kg
- Pack information: 6 x 1,5 kg
- Fast drying
- Curing speed: fast
Technical details
| Product type | Brush or roller |
| Size / content | 1,5 kg |
| Finish / colour | grey |
| Pack information | 6 x 1,5 kg |
| Suitable for | galvanised substrates, aluminium, GRP, and wood |
| Mixing ratio | 5:1 |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation |
| Storage | At least 3 years in unopened original container |
| VOC | EU limit value for this product (category B / b): 250 g / l. This product contains max. 220 g / l of VOC |
| GTIN | 4016176520842 |
