Description
Mipa P 99 Multi-Star is a body filler and putty with adhesion on steel plates, zinced plates, aluminium, tinned surfaces, wood and GRP. Short drying time and easy sandability are further characteristics of this premium product.
About this product
PE-high build body filler incl. hardener. For both filling and finishing, for all metal substrates, alu, zinc and fibre glass.
What is this product used for?
Use this filler for repairing uneven areas, shaping contours and preparing the substrate before primer and topcoat. It is intended for repair work where flexibility, adhesion and sanding properties matter.
Application notes
Mix the filler with the supplied hardener in the stated ratio (100:2). Apply in thin layers on a clean, sanded substrate, allow it to cure and then sand to the required contour.
Features
- Body filler
- Finish / colour: beige
- Size / content: 250 g
- Pack information: 6 x 250 g
- Suitable for: cars, steel, aluminium, and GRP
- GTIN: 4016176036428
Technical data
| Product type | Body filler |
| Size / content | 250 g |
| Finish / colour | beige |
| Pack information | 6 x 250 g |
| Suitable for | cars, steel, aluminium, and GRP |
| Mixing ratio | 100:2 |
| Pot life | 3 – 4 min with Mipa Härter P at 20 °C Spray / processing viscosity: |
| Drying / flash-off | and easy sandability are further characteristics of this premium product |
| GTIN | 4016176036428 |
| Often used together with |
|
Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
