Description
This 1K filler with excellent filling properties can be applied to slightly sanded 2K old paintworks, shop primers and directly to steel, zinced substrates, aluminium, MDF ( untreated as well as coated with primer or lacquer foil) and to plastics commonly used in automotive industry (test application is required).
Product details
This product offers enormous time- savings due to fast drying and sandability. Recoatable with water-based or solvent-based Mipa 1K and 2K paints.
Where does this product work best?
This product is intended for professional coating work on zinced substrates, steel, aluminium, and plastic parts with a Pricegroup 3 – Pricegroup 2 – Pricegroup 1 finish.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Adjust the product with Mipa 2K-Thinner where required by the system and application method. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Features
- This 1K filler
- Finish / colour: Pricegroup 3 – Pricegroup 2 – Pricegroup 1
- Size / content: 5 kg
- Suitable for: zinced substrates, steel, aluminium, and plastic parts
- Fast drying
- GTIN: 4016176492958
Technical information
| Product type | This 1K filler |
| Size / content | 5 kg |
| Finish / colour | Pricegroup 3 – Pricegroup 2 – Pricegroup 1 |
| Suitable for | zinced substrates, steel, aluminium, and plastic parts |
| Thinner | Mipa 2K-Thinner |
| Pot life | Spray / processing viscosity: |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 2 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| VOC | < 610 g / l.* |
| GTIN | 4016176492958 |
| Often used together with |
|
For the compatible thinner options for this product, see the linked products in the technical information table.
