Description
Mipa Haftgrund is a fast drying 1K steel primer. For interior and exterior use and recoatable with all Mipa KH paints based on synthetic resin.
About this product
Colours: H 624 red-brown, H 629 grey. Further colour shades on request.
Where does this product work best?
This product is intended for professional coating work on steel with a H 629 grey finish.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Adjust the product with Mipa UN, UN 21 where required by the system and application method. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Highlights
- Adhesive or sealant
- Finish / colour: H 629 grey
- Size / content: 2,5 l
- Pack information: 2 x 2,5 l
- Suitable for: steel
- Fast drying
Technical information
| Product type | Adhesive or sealant |
| Size / content | 2,5 l |
| Finish / colour | H 629 grey |
| Pack information | 2 x 2,5 l |
| Suitable for | steel |
| Thinner | Mipa UN 21 |
| Pot life | with Härterverdünnung 2 days Spray / processing viscosity: |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 3 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| VOC | < 430 g / l |
| GTIN | 4016176006995 |
| Often used together with |
|
Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
