Description
Fast drying primer with good filling power and high corrosion protection.
Product details
2K-acrylic primer with universal adhesion on steel, zinced steel and aluminium. Recoatable with polyester-spray filler or putty.
What is this product used for?
This product is intended for professional coating work on zinced steel, galvanised substrates, steel, and aluminium with a darkgrey finish.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (5:1 by weight; 4:1 by volume) with Mipa H 10, MS 10, HS 10; adjust with Mipa 2K-Thinner fast / normal if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation
Features
- Fast drying primer
- Finish / colour: darkgrey
- Size / content: 1 l
- Pack information: 6 x 1 l
- Suitable for: zinced steel, galvanised substrates, steel, and aluminium
- Corrosion protection
Technical data
| Product type | Fast drying primer |
| Size / content | 1 l |
| Finish / colour | darkgrey |
| Pack information | 6 x 1 l |
| Suitable for | zinced steel, galvanised substrates, steel, and aluminium |
| Mixing ratio | 5:1 by weight; 4:1 by volume |
| Hardener | H 10, MS 10, HS 10 |
| Thinner | Mipa 2K-Thinner |
| Pot life | 4 – 5 h with Mipa 2K-Härter H 10 / MS 10 / HS 10 at 20 °C Spray / processing viscosity: |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation |
| GTIN | 4016176161861 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
