Description
High-quality, water-based 2K PU paint for coatings on plastics like for example TPU, PA, ABS and PP for interior and exterior use. This paint is characterized by its particularly high mechanical and chemical resistance.
Product details
Its special formulation allows the product to be used as ready-for-use colour paint or unpigmented as clear protection coat (clearcoat), without changing mixing ratio with the hardener. After curing, the product fulfils the requirements of saliva and sweat resistance according to DIN 53160-1 and -2.
Where does this product work best?
Use this clearcoat as the final transparent layer over compatible colour coats when a matt look is required. The listed application areas include plastics, ABS, TPU, and PA.
How to use
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (6:1 by weight; 5:1 by volume) with Mipa WPU 9805-25; adjust with Mipa WBS VE-Wasser if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 70 % relative humidity. Ensure adequate air ventilation
Key features
- High-quality, water-based 2K PU paint
- Finish / colour: matt
- Size / content: 5 kg
- Suitable for: plastics, ABS, TPU, and PA
- Chemical resistance
- Flexible film
Technical information
| Product type | High-quality, water-based 2K PU paint |
| Size / content | 5 kg |
| Finish / colour | matt |
| Suitable for | plastics, ABS, TPU, and PA |
| Mixing ratio | 6:1 by weight; 5:1 by volume |
| Hardener | Mipa WPU 9805-25 |
| Thinner | Mipa WBS VE water |
| Processing conditions | From + 10 °C and up to 70 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 1 year in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| VOC | < 80 g / l |
| GTIN | 4016176586947 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table. Where a matching primer, basecoat, clear coat or companion system product is explicitly supported, it is also linked there. Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
