Description
Water-based 1K zinc phosphate primer with excellent water resistance for steel, zinced substrates and aluminium.
About this product
Can be applied by paint brush, roller and spraying. Recoatable with all solvent- and waterborne 1K and 2K paints.
What is this product used for?
This product is intended for professional coating work on zinced substrates, steel, and aluminium.
Application notes
Shake the can thoroughly before use and spray several even coats on a correctly prepared surface. Observe the flash-off time between coats and allow the film to dry fully before sanding, polishing or overcoating. From + 10 °C and up to 70 % relative humidity. Ensure adequate air ventilation
Highlights
- Primer
- Size / content: 20 kg
- Suitable for: zinced substrates, steel, and aluminium
- Aerosol format for smaller areas and local work
- GTIN: 4016176609806
Technical data
| Product type | Primer |
| Size / content | 20 kg |
| Suitable for | zinced substrates, steel, and aluminium |
| Thinner | Mipa WBS VE water |
| Pot life | Spray / processing viscosity: |
| Processing conditions | From + 10 °C and up to 70 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 2 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| VOC | < 30 g / l |
| GTIN | 4016176609806 |
FAQ
What is Pro Mix Aqua WAY 1060-20 WBS 1K acrylic primer basic pack. 20 kg used for?
This product is intended for professional coating work on zinced substrates, steel, and aluminium.
Which substrates or application areas are mentioned for Pro Mix Aqua WAY 1060-20 WBS 1K acrylic primer basic pack. 20 kg?
The listed substrates or application areas include zinced substrates, steel, and aluminium.
Is a thinner listed for Pro Mix Aqua WAY 1060-20 WBS 1K acrylic primer basic pack. 20 kg?
Yes. The listed thinner is Mipa WBS VE-Wasser Pricegroup I-III.
