Description
High solid 2K high-build polyurethane acrylic coating with active corrosion protection in HS quality with high vertical stability up to 250 µm dry film thickness.
About this product
Suitable for industrial, high-build and top-quality coatings of machines, construction components, constructions and construction machinery. For interior and exterior use.
Typical applications
This product is intended for professional coating work on zinced substrates and steel with a gloss, satin finish.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (8:1 by weight; 6:1 by volume) with Mipa PU 916-10, PU 916-25; adjust with Mipa 2K-Thinner if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Key features
- Industrial coating
- Finish / colour: gloss, satin
- Size / content: 20 kg
- Suitable for: zinced substrates and steel
- High-build formulation
- Corrosion protection
Technical details
| Product type | Industrial coating |
| Size / content | 20 kg |
| Finish / colour | gloss, satin |
| Suitable for | zinced substrates and steel |
| Mixing ratio | 8:1 by weight; 6:1 by volume |
| Hardener | Mipa PU 916-10, PU 916-25 |
| Thinner | Mipa 2K-Thinner |
| Pot life | with hardener -10 approx. 1 h at 20 °C with hardener -40 approx |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 3 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| GTIN | 4016176521146 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
