Description
Highly stressable 2K polyurethane acrylic paint to give a scratch-resistant and robust coating to transport and floor surfaces and to highly stressed surfaces of commercial vehicles, construction machinery, agricultural vehicles and equipment etc.
Product details
Possible fields of application: – driver’s cab and bodies of commercial vehicles – floor and storage surfaces of commercial vehicles and working platforms – rims, underbody and chassis areas – impact protection, roof rack, spare wheel covers etc. The very high vertical stability allows extremely high-build applications.
Typical applications
This product is intended for professional coating work on commercial vehicles with a red, matt finish.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (4:1 by weight; 3:1 by volume) with Mipa PU 912-xx; adjust with Mipa 2K-Thinner if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Key features
- Textured coating
- Finish / colour: red, matt
- Size / content: 5 kg
- Pack information: 2 x 5 kg
- Suitable for: commercial vehicles
- High-build formulation
Technical information
| Product type |
Textured coating |
| Size / content |
5 kg |
| Finish / colour |
red, matt |
| Pack information |
2 x 5 kg |
| Suitable for |
commercial vehicles |
| Mixing ratio |
4:1 by weight; 3:1 by volume |
| Hardener |
Mipa PU 912-xx |
| Thinner |
Mipa 2K-Thinner |
| Pot life |
with hardener -10 approx |
| Processing conditions |
From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| GTIN |
4016176532999 |
| Often used together with |
- Compatible hardener: Mipa PU 912-10 2K-PU hardener short
- Compatible hardener: Mipa PU 912-25 2K PU hardener, normal
- Compatible thinner: Mipa 2K Thinner Long V 40
- Compatible thinner: Mipa 2K Thinner Normal V 25
- Compatible thinner: Mipa 2K Thinner Short V 10
- Compatible thinner: Mipa PU 330-20 5 kg net 2K PU textured coating, matt, various colours, size I
- Compatible thinner: Mipa PU 330-20 5 kg net 2K PU textured coating, matt, various colours, size II
- Compatible thinner: Mipa PU 330-20 5 kg net 2K PU textured coating, matt, various colours, size III
- System companion: Mipa PU 330-20 5 kg net 2K PU textured coating, matt, various colours, size I
- System companion: Mipa PU 330-20 5 kg net 2K PU textured coating, matt, various colours, size II
- System companion: Mipa PU 330-20 5 kg net 2K PU textured coating, matt, various colours, size III
- Preparation product: Mipa WBS Cleaner 5 l
- Preparation product: Mipa WBS Cleaner FINAL 5 l
- Preparation product: Mipa WBS Cleaner FINAL Spray 400 ml
- Preparation product: Mipa silicone remover
|
For this system, the compatible hardener and thinner options are listed in the technical information table. Where a matching primer, basecoat, clear coat or companion system product is explicitly supported, it is also linked there. Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
Frequently Asked Questions
What is Pro Mix Industry PU 330-20 2K PU textured coating, matt, basic pack. 5 kg used for?
This product is intended for professional coating work on commercial vehicles with a red, matt finish.
Which substrates or application areas are mentioned for Pro Mix Industry PU 330-20 2K PU textured coating, matt, basic pack. 5 kg?
The listed substrates or application areas include commercial vehicles.
What finish is shown for Pro Mix Industry PU 330-20 2K PU textured coating, matt, basic pack. 5 kg?
The listed finish is red, matt.
