Description
Fast drying, water-based finishing varnish for PVC tarps and flooring, balls, PUR foam profiles and so on in interior and exterior use. Can be used as 1K or 2K product.
Product details
Can also be used untinted as a transparent coating. Fast drying, water thinnablefinishing varnish based on polyurethaneacrylate dispersionforPVCcanvasand flooring as wellasotherkinds ofplastic.
What is this product used for?
This product is intended for professional coating work on plastics with a gloss finish.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (5:1); adjust with Mipa WBS VE-Wasser if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Highlights
- Fast drying, water-based finishing varnish
- Finish / colour: gloss
- Size / content: 5 kg
- Suitable for: plastics
- Interior and exterior use
- Mixing ratio: 5:1
Technical information
| Product type | Fast drying, water-based finishing varnish |
| Size / content | 5 kg |
| Finish / colour | gloss |
| Suitable for | plastics |
| Mixing ratio | 5:1 |
| Thinner | Mipa WBS VE water |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 2 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| VOC | < 25 g / l.*** |
| GTIN | 4016176304053 |
| Often used together with |
|
For the compatible thinner options for this product, see the linked products in the technical information table. Where a matching primer, basecoat, clear coat or companion system product is explicitly supported, it is also linked there. Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
