Description
This oxidation-curing high-build one-layer paint with active protection against corrosion is suitable to apply thick coatings on steel constructions, cast parts, containers, machines, chassis, switchboards and so on which are made of steel, zinced steel and aluminium.
Product information
For interior and exterior use. One-coat application onmetal, steel as well as zincedsubstrates and aluminium in interiorand exterior use.
What is this product used for?
This product is intended for professional coating work on zinced steel, steel, and aluminium with a gloss, semi-gloss finish.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Adjust the product with Mipa UN, UN 21, KH where required by the system and application method. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Features
- This oxidation-curing high-build one-layer paint
- Finish / colour: gloss, semi-gloss
- Size / content: 5 kg
- Suitable for: zinced steel, steel, and aluminium
- High-build formulation
- Interior and exterior use
Technical data
| Product type | This oxidation-curing high-build one-layer paint |
| Size / content | 5 kg |
| Finish / colour | gloss, semi-gloss |
| Suitable for | zinced steel, steel, and aluminium |
| Thinner | Mipa UN 21 |
| Pot life | 2 days with Mipa Härterverdünnung Spray / processing viscosity: |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 2 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| VOC | < 340 g / l.* |
| GTIN | 4016176305043 |
