Description
This oxidation-curing high-build one-layer paint with active protection against corrosion is suitable to apply thick coatings on steel constructions, cast parts, containers, machines, chassis, switchboards and so on which are made of steel, zinced steel and aluminium.
Product information
Also suitable for wood substrates. For interior and exterior use.
What is this product used for?
This product is intended for professional coating work on zinced steel, steel, aluminium, and wood with a gloss finish.
Application notes
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Adjust the product with Mipa 2K-Thinner where required by the system and application method. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Highlights
- Industrial coating
- Finish / colour: gloss
- Size / content: 5 kg
- Suitable for: zinced steel, steel, aluminium, and wood
- Fast drying
- High-build formulation
Technical information
| Product type | Industrial coating |
| Size / content | 5 kg |
| Finish / colour | gloss |
| Suitable for | zinced steel, steel, aluminium, and wood |
| Thinner | Mipa 2K-Thinner |
| Pot life | Spray / processing viscosity: |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 3 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| VOC | < 400 g / l.* |
| GTIN | 4016176304060 |
| Often used together with |
|
For the compatible thinner options for this product, see the linked products in the technical information table.
