Description
High-quality 2K polyurethane acrylic primer with active corrosion protection, high vertical stability and excellent adhesion on steel, zinced substrates, aluminium and GRP.
About this product
Recoatable with 1K and 2K paints. Can be used as adhesion promoter, primer and primer filler.
Typical applications
This product is intended for professional coating work on zinced substrates, zinced steel, steel, and aluminium.
How to use
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (10:1 by weight; 7:1 by volume) with Mipa PU 900-25, PU 912-10, PU 912-25; adjust with Mipa 2K-Thinner if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Features
- High-quality 2K polyurethane acrylic primer
- Size / content: 20 kg
- Suitable for: zinced substrates, zinced steel, steel, and aluminium
- Corrosion protection
- Mixing ratio: 10:1 by weight; 7:1 by volume
- GTIN: 4016176521672
Technical details
| Product type | High-quality 2K polyurethane acrylic primer |
| Size / content | 20 kg |
| Suitable for | zinced substrates, zinced steel, steel, and aluminium |
| Mixing ratio | 10:1 by weight; 7:1 by volume |
| Hardener | Mipa PU 900-25, PU 912-10, PU 912-25 |
| Thinner | Mipa 2K-Thinner |
| Pot life | with hardener -25 approx |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 3 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| VOC | < 450 g / l.* |
| GTIN | 4016176521672 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
