Description
2K polyurethane acrylic anti-slip paint with long open time for high-quality anti-slip coatings on walkable machine parts and constructions.
About this product
Suitable for paint brush and roller application. Approval according to DIN EN 16165 – anti-slip property – R 11.
Typical applications
This product is intended for professional coating work with a semi gloss finish.
Use and processing
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (10:1 by weight; 8:1 by volume) with Mipa PUR Plus-Härter A 60; adjust with Mipa 2K-Thinner if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Key features
- Industrial coating
- Finish / colour: semi gloss
- Size / content: 5 kg
- Mixing ratio: 10:1 by weight; 8:1 by volume
- GTIN: 4016176375541
Technical data
| Product type | Industrial coating |
| Size / content | 5 kg |
| Finish / colour | semi gloss |
| Mixing ratio | 10:1 by weight; 8:1 by volume |
| Hardener | Mipa PUR Plus Hardener A 60 |
| Thinner | Mipa 2K-Thinner |
| Pot life | with hardener -10 approx. 1 h at 20 °C with hardener A 60 approx. 8 h at 20 °C Spray / processing viscosity: |
| Processing conditions | From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation |
| Storage | For at least 3 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| VOC | < 370 g / l.*** |
| GTIN | 4016176375541 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table. Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
