Description
Mipa Rapidprimer-Spray is a fast drying, high quality one-component corrosion protection primer. Especially suited as an adhesion promoter for minor repairs and sanded through areas.
Product details
Adheres to iron, steel, zinc and after appropriate pre- treatment, to aluminium as well as to recoatable plastics commonly used in the automotive sector (we recommend we recommend a test application). Tried and tested fast drying one-component self etching primer with active protection against corrosion.
What is this product used for?
This product is intended for professional coating work on steel, aluminium, and plastics with a red brown finish.
Use and processing
Shake the can thoroughly before use and spray several even coats on a correctly prepared surface. Observe the flash-off time between coats and allow the film to dry fully before sanding, polishing or overcoating.
Key features
- Primer spray
- Finish / colour: red brown
- Size / content: 400 ml
- Pack information: 12 x 400 ml
- Suitable for: steel, aluminium, and plastics
- Fast drying
Technical details
| Product type | Primer spray |
| Size / content | 400 ml |
| Finish / colour | red brown |
| Pack information | 12 x 400 ml |
| Suitable for | steel, aluminium, and plastics |
| Drying / flash-off | s at 20 °C Dust dry after approx. 5 min Set to touch after approx. 10 min Overcoatable after approx. 30 min Sandable after approx |
| GTIN | 4016176379877 |
| Often used together with |
|
Suitable preparation or cleaning products that are explicitly mentioned in the product data are linked there as well.
