Mipa VC 250-30 1 kg net Single-coat brush-on paint, silk matt, various shades PG II

23,09

Thixotropic high-build monolayer paint to coat constructions ( halls, pipes, doors, wall and ceiling panels, roofs, recipients, container, vehicle constructions) made of steel, zinced steel, aluminium and PVC.

  • Brush or roller
  • Size / content: 1 kg
  • Finish / colour: Mipa Pro Mix® Industry
  • Suitable for: zinced steel, steel, aluminium, and concrete
SKU: 136120000S Category:

Description

Thixotropic high-build monolayer paint to coat constructions ( halls, pipes, doors, wall and ceiling panels, roofs, recipients, container, vehicle constructions) made of steel, zinced steel, aluminium and PVC.

About this product

Suitable for brush, roller and spray application. For interior and exterior use.

Where does this product work best?

This product is intended for professional coating work on zinced steel, steel, aluminium, and concrete with a Mipa Pro Mix® Industry finish.

Application notes

Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Apply even coats and respect the flash-off, drying and recoating times of the full system. From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation

Features

  • Brush or roller
  • Finish / colour: Mipa Pro Mix® Industry
  • Size / content: 1 kg
  • Suitable for: zinced steel, steel, aluminium, and concrete
  • High-build formulation

Technical details

Product type Brush or roller
Size / content 1 kg
Finish / colour Mipa Pro Mix® Industry
Suitable for zinced steel, steel, aluminium, and concrete
Pot life Spray / processing viscosity: Ready for use, if necessary thin with ipa UN-Verdünnung or Verdünnung UN 21
Processing conditions From + 10 °C and up to 80 % relative humidity. Ensure adequate air ventilation
Storage For at least 3 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight
VOC < 500 g / l.*
GTIN 4016176187540

Common questions

What is Mipa VC 250-30 1 kg net Single-coat brush-on paint, silk matt, various shades PG II used for?
This product is intended for professional coating work on zinced steel, steel, aluminium, and concrete with a Mipa Pro Mix® Industry finish.
Which substrates or application areas are mentioned for Mipa VC 250-30 1 kg net Single-coat brush-on paint, silk matt, various shades PG II?
The listed substrates or application areas include zinced steel, steel, aluminium, and concrete.
What finish is shown for Mipa VC 250-30 1 kg net Single-coat brush-on paint, silk matt, various shades PG II?
The listed finish is Mipa Pro Mix® Industry.

Additional information

Weight 1,126 kg