Description
Fast drying, water-borne 2K leather paint for smooth synthetic and real leather substrates that can be used for coating and repairing car seats, dashboards, door panels, centre consoles, add-on parts, etc. for interior and exterior use.
Product information
Mipa WBC Binder 2K-Lederlack is tintable with Mipa WBC base tinters and thus provides a wide range of colours for the exact reproduction of different leather shades. Can also be used as transparent finish to increase the abrasion resistance, e. g. to prevent staining on clothes in case of intensive leather shades.
Where does this product work best?
Use this clearcoat as the final transparent layer over compatible colour coats when a gloss look is required. The listed application areas include cars and plastic.
How to use
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (5:1). Apply even coats and respect the flash-off, drying and recoating times of the full system. From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation
Features
- 2K clearcoat
- Finish / colour: gloss
- Size / content: 1 l
- Pack information: 3 x 1 l
- Suitable for: cars and plastic
- Fast drying
Technical details
| Product type | 2K clearcoat |
| Size / content | 1 l |
| Finish / colour | gloss |
| Pack information | 3 x 1 l |
| Suitable for | cars and plastic |
| Mixing ratio | 5:1 |
| Processing conditions | From +10 °C and up to 80 % relative air humidity. Ensure an adequate air ventilation |
| Storage | for at least 2 years in unopened original containers. Frost-free storage |
| GTIN | 4016176628487 |
| Often used together with |
|
For the compatible thinner options for this product, see the linked products in the technical information table.
