Description
Mipa WEP 2300-50 is a chemical- and abrasion-resistant 2K coating for metallic and mineral substrates in interior use. Suitable for coating floors in garages and warehouses.
Product details
Water-based 2K epoxy floor paint, semi gloss. High mechanical and chemical resistance.
Where does this product work best?
This product is intended for professional coating work on concrete.
How to use
Prepare the substrate thoroughly and remove grease, dust and loose contamination before coating. Mix the product in the stated ratio (4:1) with Mipa WEP 9300-25; adjust with Mipa WBS VE-Wasser if required. Apply even coats and respect the flash-off, drying and recoating times of the full system. Do not apply at a object temperature below + 10 °C or above + 30 °C
Features
- Floor paint
- Size / content: 5 kg
- Suitable for: concrete
- Chemical resistance
- Gloss finish
- Mixing ratio: 4:1
Technical details
| Product type | Floor paint |
| Size / content | 5 kg |
| Suitable for | concrete |
| Mixing ratio | 4:1 |
| Hardener | Mipa WEP 9300-25 |
| Thinner | Mipa WBS VE water |
| Pot life | 3 – 4 h at 20 °C Spray / processing viscosity: |
| Storage | For at least 2 years in the unopened original container. Optimum storage conditions between + 5 °C and + 25 °C, avoid direct sunlight |
| VOC | < 40 g / l |
| GTIN | 4016176472943 |
| Often used together with |
|
For this system, the compatible hardener and thinner options are listed in the technical information table.
